Washing instructions for Stab vest.
CLEANING INSTRUCTIONS - ALL STAB VEST OUTERS
HAND WASH ONLY!
ALWAYS ENSURE TO REMOVE THE STAB PANELS BEFORE WASHING!
Place 3 or 4 droplets of "Comfort type fabric cleanser" in water and immerse the vest in the water for approximately 3 to 5 minutes depending on the level of dirt on your vest.
You may need to agitate the water, or lift the vest in and out for a few minutes depending on the level of cleaning required. You may also need to change the water, depending on the level of cleaning needed.
For harder to remove dirt or marks use a soft brush only dipped in the water, do not use a lot of pressure as this may damage the mesh, then repeat cleaning instructions.
DO NOT USE HOT WATER
Use tap water at a moderate temperature only.
Dry the vest in a shaded area (avoid direct sunlight). We suggest hanging your vest, although laying it flat on a towel and rotating the vest a few times during the drying process is also recommended.
If you get the stab panels wet immediately follow the instructions shown for drying your outer vest.